Tape Dispenser CNC and 3D Printer Files

You asked for it, so here you go! What you’re buying is the unadulterated 3D model of the CNC version and the 3D Printer version of my tape dispenser. READ CAREFULLY and look at the pictures to see what files you’ll receive.

The CNC model will require you to do some CAD/CAM work to complete the cutting. You won’t find a file that you can just load onto Easel and cut with your X-Carve. Every machine is different and you need to do a little setup. I’ve included .F3D, .STEP, and .STL files for you to work with. Make sure you can make use of these before moving forward. There is also a brief guide to point you in the right direction but it’s not a step by step guide. Again, every machine is different!

The 3D printer version is simple to print. I’ve included .F3D, .STEP, and .STL files along with a brief guide. It’s a simple print but your printer bed will need to be at least 240mm in one direction to fit the model. You can’t just scale down to fit. Get a hold of me before purchasing if you have any questions.